1. Into the wall design
The main source of moisture is the ground. Solved the problem of moisture absorption at the bottom of the Bathroom Cabinet, and successfully blocked 50% of water vapor penetration in the bathroom cabinet. The development of the wall-mounted mirror cabinet can avoid the cabinet from directly contacting the ground, and maximize the use of the upper space of the bathroom.
2. Metal legs
If Bathroom Cabinet is made of wooden cabinet legs, it is easy to get wet, and it will lead the moisture to the cabinet body unconsciously. If metal is used as the leg material to support the cabinet at the bottom of the cabinet, the problem is solved ingeniously. In addition, the "skeleton" of the aluminum cabinet legs is strong, and the anti-rust feature ensures that the cabinet legs will not rust after contact with water.
3. Waterproof material
The wooden Bathroom Cabinet is easily deformed by absorbing water, so it has very strict requirements on the surrounding environment, and the bathroom of an ordinary family generally has only a few square meters of space, and it is not easy to achieve wet and dry partitioning. When choosing a bathroom cabinet, you can choose to use fire-resistant board, wear-resistant board, high molecular polymer and other composite plates as the product of the cabinet surface material.
4. Rubber edge banding
Wrap the edge of the plate with a multi-functional anti-collision rubber strip to completely block the invasion of moisture and easily eliminate the noise of closing the door.
5. Waterproof aluminum foil
The hot water in the bathroom basin or faucet will generate a lot of condensed water, which will flow into the bottom of the cabinet along the countertop, causing moldy deformation of the Bathroom Cabinet. If you can add a layer of waterproof aluminum foil or rubber pad to the bottom of the cabinet in time, you can solve this problem. Put them on the bottom of the drawer to prevent the moisture while fixing the bath products.